- Standard:
- ASTM, bs, DIN, ASTM A358-2005, ASTM A53-2007, BS 6323, BS 6363, DIN 1626, DIN 2391, DIN 2444
- Grade:
- 10#-45#, API J55-API P110, Q195-Q345, 20#, API K55, API L80, Q235, Q195,Q195-Q345
- Thickness:
- 0.5 - 20 mm
- Section Shape:
- Rectangular
- Outer Diameter:
- 10-*500mm
- Place of Origin:
- Hebei, China
- Application:
- OIL PIPE
- Technique:
- Hot Rolled
- Certification:
- API
- Surface Treatment:
- Galvanized
- Special Pipe:
- Thick Wall Pipe
- Alloy Or Not:
- Non-Alloy
- Name:
- 60 x 80 Galvanized Gas Pipeline Rectangle Seamless Steel Tubes
- Surface Treat:
- Galvanized
- Steel Grade:
- API 5L,DIN,JIS,GB,ASTM
- surface finished:
- black or oiled against with rust
- Length:
- 3-12m
- Packing:
- By bundle
- Secondary Or Not:
- Non-secondary
- 50 Ton/Tons per Day
- Packaging Details
- by bundle
- Port
- Tianjin China
- Lead Time :
- 7 days per 20ft container
AISI 304 Hollow Section Straight Drink Water Stainless Steel Square Tube
size: OD:10*20-300*500mm, Dia:0.5-20mm,
Length:3-12m
AISI 304 Hollow Section Straight Drink Water Stainless Steel Square Tube
Characteristics:
The pipe internal stress is very small and uniformly distributed after the full- length expansion. The corrosion and cracking of the pipe owing to stress can be effectively prevented. The application of welding on site is very easy because of the high dimension precision;
The inside and outside welding are performed after the tack welding , so the welding process is very stable with good weld quality;
Chemical components and mechanical property of seamless steel pipe:
Standard | Chemical components | Mechanical property | |||||||||||
C | Si | Mn | P | S | Cu | Ni | Mo | Cr | V | Tensile strength (Mpa) | Yield strength (Mpa) | Elongation (%) | |
ASTM A53 | ≤0.30 | / | ≤1.2 | ≤0.05 | ≤0.06 | ≤0.04 | ≤0.40 | ≤0.15 | ≤0.04 | ≤0.08 | ≥415 | ≥240 | ≥29.5 |
ASTM A106 | ≤0.30 | ≤0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≤0.04 | ≤0.40 | ≤0.15 | ≤0.04 | ≤0.08 | ≥415 | ≥240 | ≥30 |
ASTM A179 | 0.06-0.18 | ≤0.25 | 0.27-0.63 | ≤0.035 | ≤0.035 | / | / | / | / | / | ≥325 | ≥180 | ≥35 |
ASTM 192 | 0.06-0.18 | ≤0.25 | 0.27-0.63 | ≤0.035 | ≤0.035 | / | / | / | / | / | ≥325 | ≥180 | ≥35 |
Application:
The pipes are mainly used as long distance transportation pipeline for oil, gas, liquid coal etc. on land and
offshore. And also can be applied as construction pipes on offshore platform, power station, petrochemistry and city
construction etc.
Sizes
Square & Rectangular Hollow Sections
Sizes :10×10 – 400×400 mm 10×20 – 500×300 mm 3/ 4″x3/ 4″ – 16″ x16″
Wall Thickness :0.60 mm – 12.50 mm 0.063″ – 0.500″
Circular Hollow Sections:
Sizes:10 mm – 406.4 mm
Wall Thickness:0.60 – 12.50 mm
Length
Supplied in 6 and 12 meter lengths unless otherwise specified
Length Tolerance:-0 / +50 mm for mill lengths + / – 1 mm for cut lengths
Surface Conditions
Uncoated or protected with oil
End Finishing
Square cut or bevelled
Marking
On pipe: Paint marking
On bundles: information Tags
Packing
In bundles fastened with steel straps if required to be supported with wooden dunnages, bare or wrapped in p.p woven fabric / paper (VCI protection upon request) permanent lifting slings, steel or cloth applicable upon request
Tests Performed
Visual Dimensional Inspection Destructive Tests:
Tensile Test, Flattening Test, Flaring Test, Expansion Test, Impact Tests
Non-Destructive Test: (Eddy Current)
Metallographic Examination
Chemical Analysis of Raw Material
Mill Certificates
Issued upon request according to EN 10204
2.1; 2.2; 3.1
ISO9001-2008
Ali Supplier Assessment
